#CREATION WORKSHOP SOFTWARE DOWNLOAD HOW TO#
#CREATION WORKSHOP SOFTWARE DOWNLOAD SOFTWARE#

To pick your display, find it in the list, select it, and click the plus button. To remove parts, select the minus button. The current one listed is just my laptop screen currently. You will need to have your projector plugged in at this point, or it won't show up on the list. PURPLE - This lets you select which display you want to shine the picture is on. It gives you the accuracy based on your projector resolution and your build size. BLUE - This is just an informational window. In the case of the, it would be the port that the Arduino with GRBL installed is on. GREEN - This is the port that connects to your controller. If you print a model that is 20mmx20mm, and it comes out 19.2mmx19.7mm, this button will auto-calculate the adjusted build size to get your model to print out at 20mmx20mm. The adjust button will allow you to fine tune your build size.

#CREATION WORKSHOP SOFTWARE DOWNLOAD SOFTWARE#

Creation Workshop is a unique software package for 3D printing. ORANGE - Applies any changes you have made to the currently selected machine (in RED) YELLOW - Defines your build size.Д¬reation Workshop. RED - This lets you add new machines, or delete ones. In this window, there are several sections used for configuring your specific machine.Д«elow is described what each section is, corresponding to the colors on the image.

#CREATION WORKSHOP SOFTWARE DOWNLOAD HOW TO#

We'll start with how to configure your machine. I attached the software here for reference. However, this software works with all types of DLP printers, so all of what follows will apply to a variety of DLP printers, not just the LiteFab. In what follows I will explain how to use this software for a DLP printer, and most of the time reference, which is the DLP printer I designed. Creation Workshop is a software created to control DLP type printers with ease. TestВ model.stl file isВ here.Д®ntered into 3D printing contest! Check it out here: - The purpose of this instructable is to explain how to use Creation Workshop. If you have any question, please let us know. P utВ configВ filesВ to the profilesВ folder 5.В Pre-sliced test model is here: download and print.

P utВ MachineВ filesВ toВ the MachinesВ folder 4. Download our configВ filesВ andВ printerВ profiles( URL: ) profiles are like this: Draken_Profiles.zip: +-Machines +- 1st_37X37microns.machine +- 2nd_43X43microns.machine +- 3rd_50X50microns.machine +- 4th_61X61microns.machine +- 5th_70X70microns.machine +- 6th_75X75microns.machine +- 7th_82X82microns.machine +- 8th_90X90microns.machine +- Profiles: +- BasePrintProfile.slicing 3. For software demo and download, please fellow this youtube video and links on the description section of the video: Or this link: 2.

Creation workshop software download